Among the eight bonding configurations of hydrides, the MSM corresponding to the bonding configuration of the hydrides in the grain boundaries is the major mode that determines the mechanism of hydrogen’s influence on oxygen impurities.

We show in Figure  5b the integrated intensity of the MSM and the bonded oxygen content C O for all the samples with R H = 97.5% to 99.2%. It is clear that the integrated intensity of the MSM decreases with R H increasing from 97.5% to 98.6% and then increases when further increasing R H from 98.6% to 99.2%. As also shown in Figure  5b, C O has an inverse evolution compared with the integrated intensity of the MSM, illustrating that the MSM is closely related to the oxygen impurities. H atoms and ions incorporate the silicon dangling bonds along the platelet-like configuration of the amorphous-crystalline interface, that is, grain boundaries, buy APR-246 and form the hydride corresponding to the MSM. These hydrides located in grain boundaries can effectively passivate the nc-Si:H films by preventing the oxygen incursions from inducing the increase of dangling bonds (Pb center defects) Selleck Alpelisib [10]. And this

inverse correlation between the integrated intensity of the MSM and C O further proves that the oxygen impurities mainly reside at the grain boundaries of the nc-Si:H films. Based on the above results and analysis, we can hereby draw a clear physical picture of the structure evolution mechanism and the effect of the hydrogen behavior on the structure as well as the oxygen impurities in the growth process of the nc-Si:H thin film. The growth of the nc-Si:H thin film is the overall effect of two competing processes: the formation of radicals and the etching of deposition. These two processes are significantly influenced by the proportions of the impinging SiH x radicals and atomic hydrogen ions, which vary with different hydrogen dilutions. During the initial stage, increasing R H from

97.5% to 98.6% led to the decrease of the density of the SiH x radicals, which together why with the H etching effect resulted in the decrease of the growth rate. Considering the high RF power density applied on the depositing substrate, the ion bombardment effect [19] should be taken into account. The ion bombardment effect of the increasing H species on the SiH x radicals during the growth process reduced the surface diffusion length of film precursors, and these precursors could not reach their selleck chemicals llc favorable growing sites, leading to the formation of more microvoids with amorphous components in the nc-Si:H film. These subsequently formed microvoids induced larger areas of internal surfaces with dangling bonds and weaker Si-Si bonds in the growing film.

No related posts.